BASIC Stamp 2pe Module serves as the brains inside of electronics projects and applications that require a programmable microcontroller.  It is able to control and monitor timers, keypads, motors, sensors, switches, relays, lights, and more. Programming is performed in an easy-to-learn language called PBASIC.

All vital components (processor, clock source, memory, power regulator) are provided on the BS2pe's tiny PCB; just connect power and go!  Projects needing small, permanent soldering area for circuitry may benefit from combining the BS2pe-IC with the BASIC Stamp 2 Carrier Board or the Super Carrier Board.

The BS2pe-IC is useful for those that have previous experience with the BS2p and are building battery-powered or data logging applications. The execution speed is slower than the BS2p and the wake-up interval is less that 1 ms, so battery life is extended significantly.
For customers that require true multi-processing or video generation, we highly recommend the Propeller microcontroller.

Key Specifications:
Power Requirements: 5.5 to 12 VDC (Vin), or 5 VDC (Vdd)
Communication: Serial (9600 baud for programming)
Dimensions: 1.20 x 0.63 x 0.15 in (30.0 x 16.0 x 3.81 mm)
Operating Temperature: +32 to +158 °F (0 to +70 °C)

Processor Speed: 8 MHz Turbo
Program Execution Speed: ~6,000 PBASIC instructions/sec.
RAM Size: 38 Bytes (12 I/0, 26 Variable)
Scratch Pad RAM: 128 bytes
EEPROM (Program) Size: 16 x 2 KBytes; (16 K for source; ~4,000 PBASIC instructions)
Number of I/O Pins: 16 + 2 dedicated serial
Current Draw @ 5 VDC: 15mA Run, 150 µA Sleep
Source/Sink Current per I/O: 30 mA / 30 mA
Source/Sink Current per unit: 60 mA / 60 mA per 8 I/O pins
PBASIC Commands: 61
Package: 24-pin DIP
Commercial-Rated since Rev. B