The Easy Bluetooth Serial Module is an effective and low-cost solution to free your hardware applications from wires. The module is small in size, and with its SIP header design, it can fit on any 0.1” spacing breadboards for rapid prototyping. The module is compliant with Bluetooth 1.x and 2.0 allowing it to communicate with a broad range of Bluetooth devices. The Easy Bluetooth Module is compatible with all the Parallax microcontrollers.

The module has two parts, the RBT-001 module and the SIP with voltage regulator PCB. With the on-board regulator, the module can be connected to voltages higher than 3.3 VDC (such as the Parallax Board of Education 5 VDC regulated supply) without worry of damaging the unit, while the RX and TX can utilize serial communication at CMOS and TTL levels.

1.x & 2.0 Bluetooth compliant
Easy serial communication
Class 2 operation (nominal range up to 30 m)
Low power consumption
On-board regulator for safe operations across various voltages

Application Ideas:
Control a Boe-Bot robot via Bluetooth from a PC, mobile phone, or another Bluetooth module 
Communicate with a device or project wirelessly

Key Specifications:
Power requirements: 3.3 to 5 VDC
Communication: UART Command/Data Port supports for up to 921.6k baud rate
Dimensions: 1.40 x 1.79 x 0.49 in (34.41 x 45.65 x 12.51 mm)
Operating temp range: +32 to +113 °F (0 to +45 °C)

Note: RBT-001 without SIP header is not a supported platform from Parallax Inc.Technical Support.